Wiring Schematics

I've spent a few hours haphazardly using/learning to use by trial and error/watching a couple tutorial videos on Eagle, an electronics CAD program, to make a schematic and PCB diagram for the project.

These are my photos of the electronics I was asked to diagram.

This is the schematic with all its nice labels for the pins. +, -, and the other - refer to the respective places on the breadboard all these components were connected to.

On the top, left is the board with simple lines between the pins. On the bottom, right is the same board after the Auto function has been done. You can see all the fancy wiring not overlapping and only the useful labels.

If you still aren't happy with these, you can find the Eagle files are here (link updated at 11:48pm).